-
### What happened?
I've been using the following build command for about a year
```
./compile.sh build BOARD=nanopi-r2s BRANCH=current BUILD_MINIMAL=yes KERNEL_CONFIGURE=no RELEASE=bookworm HOST=…
-
FriendlyARM NanoPi R1 not booting in 22.03.01-rc4, 22.03.01-rc1 or snapshot
All is well on 21.02.3 (r16554-1d4dea6d4f)
-
Hello, I strange issue with my R5C LAN physical port. below is my connection details
wan port (eth0): connected to my fiber router
lan port (eth1): connected to my wifi access point.
Problems:
…
-
Hope someone can help. Here's the error message asked to be reported.
```
{
"url": "https://sysupgrade.openwrt.org",
"revision": "r20028-43d71ad93e",
"advanced_mode": "1",
"branc…
-
```bash
$ wget -qO- https://github.com/stupidloud/nanopi-openwrt/raw/master/scripts/autoupdate-bash.sh | bash
Downloading https://mirrors.tencent.com/lede/snapshots/targets/rockchip/armv8/packages/P…
latel updated
5 months ago
-
```
# auc -c
auc (0.1.4)
running OpenWrt 19.07.7 on ath79/generic (netgear,wndr3700v2)
checking https://chef.libremesh.org for release upgrade or updated packages
Connection error: Invalid SSL ce…
-
I'm trying to build a new image for NanoPi T6 (RK3588) on an NanoPi T6 but all the binary tools in the tools directory are for x64 and not for the arm64 architecture.
- mke2fs
- make_ext4fs
- res…
-
NanoPi R2S Plus SBC has a WiFi module based on RTL8822CS.
In LuCI I choose Network → Wireless, then Add one 5 Ghz network (select channel manually), Save & Apply.
After confirming that my 5 GHz SS…
-
Heya!
I'm currently noticing a weird behavior from Mosquitto when it comes to bridging external MQTT brokers.
My current config bridges HiveMQ to Home Assistant's Mosquitto Add On, I've set everyt…
-
# 问题简述
使用[网站](https://supes.top/)自定义构建（并未去除出厂软件包，仅添加几个常用软件包，其他设置均为默认），并使用balenaEtcher直接刷入SD卡，使用电脑连接Lan口可正常进入web界面进行配置，但Wan口连接光猫并配置好PPPoE号后发现网口并未正常工作（即接口没有正常进行拨号）。
# 个人推测
可能是内核并不支持yt8521
望提供解决方…