-
```r
library(pwr)
power.prop.test(p1 = 0.198,
p2 = 0.087,
sig.level = 0.05,
power = .80,
alternative = "two.sided")
librar…
-
Need to add some projects to the upcoming section.
- https://github.com/rooch-network
-
The command:
>status 3 CM
usually prints out
Process done
CM| IOS_ENABLED| OVERRIDE_PWR_GOOD| PWR| PWR_GOOD| STATE| UC|
--|------------|------------------|----|-----…
-
When micro:bit is connected to USB, its LED display alerts user to an i2c error when PWR is switched from 1 to 0.
1. Set PWR to 1
2. Use parallax.py library from 0.3.4 branch's library folder if y…
-
I am using the remote cards with a ZS06 Zigbee IR remote that requires the publishing of ir_send_code mqtt topics to transmit the ir signals. So I tried to set up the buttons to call a script that th…
-
dark mode is fully broken in gtk apps
![image](https://github.com/flathub/org.gtk.Gtk3theme.Breeze/assets/62666559/86f1cd8d-1acc-4885-8e1c-a9efadc9b20a)
the workaround
`flatpak override --user …
-
On a running test_08 with WiFi, when the voltage got low, the WiFi modem as shown by the Blue network LED never turned off.
[2022-05-26 17:39:45.856] ---Boot. Sw Build: src\tu_xx01.cpp May 20 2022 16…
-
Hi, I think it would be great if the values for minimum/maximum power for tuning could be set from the device, in a similar way to setting up feeder loss in dB in firmware 3.2.
This would let conf…
-
### Describe the bug
When selecting MANUAL at the ELEC PANEL the APU ON light should not illuminate.
### Steps to reproduce
In cruise, select MANUAL at the ELEC panel and check the APU PWR switch:
…
-
### Description of Issue/Question
Hello.
I'm using netmiko to do some network automation on Extreme ERS devices. As my fleet of equipment is made out of more than 300 switches, reducing the exec…