-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
Only getting…
-
hello to all devs
I have a Horus 10s Accst with R9M reciver and modul
widget ver 2.2.0
drone with 722 chip with betaflight 4.2 all parts of the widget works but not the artificial horizon .
…
-
External modules in X12S the XJT and R9M and RFD900 TXMOD.
And i can bind and use with servo output and with rssi and Smart Port Lipo Voltage Sensor working find with all modules
but as soon i jus…
-
Just updated my X20 to 1.4.2 & immediately lost the connection to my R9M Lite Module plugged into the back of my X20 transmitter.
When i select the R9M lite access option on my external module, i get…
-
## Current Behavior
After update R9M and R9MM to 3.1 working only telemetry. Stick movement not changing a channel values. After all I returned to 3.01 and all working without issue.
## Steps …
-
Hello.I am using an FrSky R9M Lite module with my x20 so that I can do ACCST 900mhz.The x20(and x18)does not seem to talk correctly to the module as when bind is selected,even though ETHOS says "bind…
-
On my X12S ISRM after updating from 1.1.1 to 1.4.4, I can no longer flash any receiver or sensor from the S.port.
On radio I have the message "Device reset", the red led blink once on the receiver, b…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
The "polarit…
-
X12S on 1.4.3 with external Module R9M2019 Accst firmware FW-R9M-ACCST-20190117 FLEX firmware on the module
also does it with IXJ module goes into emergency mode
i did set up radio before i powe…
-
## Current Behavior
Any changes made to the default settings in the LUA script are lost when Tx is powered down
## Steps to Reproduce
Make changes to default settings in the lua script, power off…