-
Me and some other users on the Artillery Discord have been trying to solve the problem of the bed temperature overshooting and basically "soft locking" the print because it never goes back down.
(m…
-
Continuation of closed issue https://github.com/tagyoureit/nodejs-poolController/issues/116
The IntelliCenter is supported but the IntelliValve is not. Or at least not supported via RS485 for incre…
-
I bought and returned a Cricut Maker because I mistakenly thought that being able to have a gear-driven rotary cutter and knife blade would make up for the proprietary software and YOU GUYS I WAS SO W…
-
Is there anybody who has already tried this firmware successfully on the SaintSmart Pro32? The Pro32 seems to be a clone of the TS100.
-
> `--flip-method=rotate-180` is a command line argument to the detectnet/imagenet/segnet/video-viewer sample programs.
>
> If you wanted to add support for this argument to `my-detection.py`, chang…
-
SBC: NVIDIA Xavier NX
OS: JP 4.5.1
DC: v 4.3 (dev)
The following hardware was used for the empirical testing:
Rpi 4B/RPLidar A1M8_R6 (firmware 1.29)/Sainsmart OM5647 camera
Nano 4GB/RPLidar A1M…
-
### Bug Description
Since i´m unable to register on reprap.org, i unfortunaly have to write down here my issue. On my Creality- CR-100 (not 10) i was trying to run an 16*2 HD44780, attached to an P…
-
On Fedora, libftdi is actually libftdi1, and the headers are in a subdir of /usr/include.
I had to change the Makefile locally to handle that, and also add -I/usr/include/libftdi1 to properly find t…
-
Hey folks. I can’t get PWM to function properly on Sainsmart RAMPS Mega2560 board with grbl-Mega.
First off - I’m checking output on D11. Correct pin for RAMPS? (I guess not but can't find any o…
-
### Application Version
4.8.0
### Platform
Windows 10, i7 processor
### Printer
INFI-20
### Reproduction steps
Created a tray in Solidworks v2014 x64.
Did an extruded cut from top of box dow…