-
Question over e-mail by Charudatt
=============================================================================================
some differences observed in v90 firmware with debug on-board
* the…
-
Hey there,
Using SI5351 to create all the clocks used on the board using a single PLL in software, should keep them all in sync. 25Mhz is the clock (by default, connected to the IC) so the software…
-
Well I have this bad identification of Super Mario RPG, it should be Lowrom. Dump works but CRC fails and I can't read rom file in an emulator.
I use HWrev 5 and tried 2 diferent boards of SNES Cic a…
-
- [x] Create manifest (https://github.com/Halium/halium-devices/pull/35)
- [x] Boot image and system image build successfully
- [x] Device boots into rootfs, `usb: Manufacturer: GNU/Linux Device` ap…
-
**Description**
I recently tried to compile the kernel on the Alpine Linux, however it failed to pass the insn_decoder_test with the following message:
```
arch/x86/tools/insn_decoder_test: error: …
-
Hi!
Get this errors
`root@DESKTOP-4VNP1BN:/RS41ng/build# cmake ..
-- The C compiler identification is GNU 10.2.1
-- The CXX compiler identification is GNU 10.2.1
-- Detecting C compiler ABI info
…
-
As discussed on ##linux-surface, hardware buttons on some Surfaces are not working. Reloading the button module works post-boot:
```
sudo modprobe -r soc_button_array
sudo modprobe soc_button_array…
-
### Environment
Hardware model: Surface Laptop 4 (intel)
Kernel version: Linux surface 6.0.9-surface #1 SMP PREEMPT_DYNAMIC Thu Nov 24 19:45:07 UTC 2022 x86_64 GNU/Linux
CPU: Dual Core Intel Core i…
-
### CircuitPython version
```python
Adafruit CircuitPython 7.3.0-beta.0 on 2022-04-01; ESP32-S3-DevKitC-1-N8 with ESP32S3
Board ID:espressif_esp32s3_devkitc_1_n8
```
### Code/REPL
```pyt…
-
@Charudatt
When the code from github is downloaded and executed once it initializes the EEPROM information with the default data on
callsign, grid and other stuff.
If later this data is changed…