-
CANbus programming shall be enabled by magic packet/on a specific CAN message id and when motor is not off (essentially when`A4950_Enabled == false`)
Implementations:
https://github.com/feaser/ope…
-
I am trying to compile an Arduino usb hostshield code for the Dragonfly, and the compiler says ''please define board in avrpins.h''.
How can i do this, i am on Linux, manjaro, and found the avrpins.…
-
**Objective:**
Trying to use the LCD shield for purposes other than camera mirroring
**Research:**
https://blog.littlevgl.com/2019-02-20/micropython-bindings
https://github.com/littlevgl/lv_bind…
-
The latest recoverd sonde (from the german Bundeswehr) contains the STM32L412KB chip and is a device with Ultra-low-power with FPU Arm Cortex-M4 MCU 80 MHz with 128 Kbytes of Flash memory. Looks the s…
-
Hi, in my boards.txt file I am using my own build flags (eg. -DFLAGNAME). Arduino-cli recognises these flags but sets these to their default values (0). How do I tell arduino-cli to set certain flags?…
-
On some boards, such as STM32 boards (and probably SAMD boards too), there are multiple I²C controllers available, typically named `Wire`, `Wire1`, etc.
Currently, this library always uses `Wire` h…
-
**Describe the bug**
I am building a custom board based on the [STM32L462RE](https://github.com/zephyrproject-rtos/zephyr/blob/main/dts/arm/st/l4/stm32l462.dtsi#L13-L21) and compilation of the `st,st…
-
I see that you IDE project is custom-made. Have you considered embedding your work to Cubemx-generated project so that it can be easily integrated to projects that use FreeRTOS, for example. Cubemx do…
-
Arduino: 1.8.19 (Windows 10), Board: "NUCLEO-L432KC, 80 MHz, Smallest Code"
Sketch uses 116112 bytes (47%) of program storage space. Maximum is 245760 bytes.
Open On-Chip Debugger 0.10.0-dev-002…
-
I have this temperature sensor from TI called TMP117 which works over the i2c bus. I want to add the driver for this sensor in embox, what is the best place to put it, and are there any similar sensor…