-
copy and pasting my bug report from https://github.com/HelTecAutomation/CubeCell-Arduino/issues/261
radio.c uses floating point numbers (doubles, to be precise) to calculate the air time (maybe the…
-
**Describe the bug**
When enabled the LoRa in STM32WL SoC, it draws more current than 70uA
**To Reproduce**
1. add the following configs to `samples/boards/stm32/power_mgmt/blinky`
```
CONFIG_S…
-
Hi,
i tryed to use the complete memory of the STM32WL for embassy boot (example provided: https://github.com/embassy-rs/embassy/tree/master/examples/boot).
To try things out i changed memory.x fro…
-
[@ALABSTM] (https://github.com/STMicroelectronics/STM32CubeH7/issues/url) we are working on new release of STM32WL "STM32Cube_FW_WL_V1.3.0". release has introduced changes in RTC driver which we belie…
-
Hello,
I have one custom board and want to connect it to Helium. I've done this using esp32 + grove lora-e5 module. I also got the lora-e5 mini board but I cannot program it. I changed RDP to AA us…
-
[The STM32WL5 list](https://github.com/ARMmbed/stm32customtargets#stm32wl) does not include:
- Ebyte [E77 module](https://www.aliexpress.com/item/1005004550760072.html) and
- Olimex [BB-STM32WL](htt…
-
Hi,
I've learned of embassy today and wanted to experiment a little bit with it on my Nucleo-68 which has a STM32WB55RG. On the blinky example I noticed that the timing was wrong. The time shown vi…
-
This is a similar issue reported by https://github.com/stlink-org/stlink/issues/1241 but for a different target.
- Programmer/board type: Onboard STlink (NUCLEO-WL55JC)
- Operating system an versi…
-
**Describe the bug**
Project fails to build using `Sysbuild` with an out of tree board.
This issue was first posted #53780 and fixed with #56801. The issue appeared again at aff9683387ff3fc6a88cb1…
-
We have written the needed data into your clipboard because it was too large to send. Please paste.
Type: Bug
Just install OCAML Platform
VS Code version: Code 1.76.1 (5e805b79fcb6ba4c2d2371296…