-
Hi,
In the example, I replaced SX1262 radio = new module() with SX126x radio=new module(). But I can the setRffrequency() is protected inside the class inside SX126x.h file. So how i can set the fr…
-
Basic SSTV support could be added to RadioLib (transmission only). Preliminary testing shows that using SX1268, SSTV header/VIS code can be correctly decoded MMSSTV (after demodulating via RTL-SDR as …
-
```c++
/*
RadioLib SX126x Transmit Example
This example transmits packets using SX1262 LoRa radio module.
Each packet contains up to 256 bytes of data, in the form of:
- Arduino Stri…
-
Hi Jan,
I was testing out RadioLib on a [Adafruit HUZZAH32 – ESP32 Feather](https://www.adafruit.com/product/3405) and spot a strange issue: the labeled SPI pins are (MOSI: 18, MISO: 19, SCK: 5) w…
-
Hello!
I have a Dorji DRF1268 module but somehow, Arduino doesn't "discover" it.
I keep getting these 2 error codes: -20 and -707
-
Docs claim that Semetech chips have capabilities for MSK and GMSK. Can those be invoked using some settings in code?
-
Hi,
I'm trying to decode FSK data from SX1268, It's working great for NRZ, however, I'm a bit stuck with whitening. I'm trying to use the built-in dewhitener for CC1101, but that one makes a few as…
-
hi, i'm new to arduino and try to run the sample project LoRaWan and i encountered some problems aout the compiling like:
libraries\SX126x-Arduino\mac\region\Region.cpp.o:(.literal.RegionGetPhyParam…
-
When compiling the 'groundstation.ino' for Fossasat-1 and selecting SX126x chipset, the code that successfully calls getFrequencyError for SX127x fails.
This is because getFrequencyError is not imp…
-
Hardware setup:
Lolin32 -dev, sx1262 chip connected to the pins described below.
// ref: Library/Arduino15/packages/esp32/hardware/esp32/1.0.4/variants/lolin32/pins_arduino.h
// Pin connections L…