-
After flashing the latest firmware onto the LilyGo T-Beam, everything appears to work correctly. After power loss, the device doesn't seem to boot up at all. rnodeconf classifies as missing.
The on…
-
Hello,
First of all, thanks for the amazing work.
I have a Heltec LoRa v3 board, and the iGate function is working as expected. However I can't get the internal battery voltage shown in the beacon…
7deve updated
5 months ago
-
### Checks
- [X] I agree to follow the MicroPython [Code of Conduct](https://github.com/micropython/micropython/blob/master/CODEOFCONDUCT.md) to ensure a safe and respectful space for everyone.
- [X…
-
SOC
ESP32
Lora IC
LILYGO LORA32 868/915MHz
Description
I am trying to figure out why the GPS module is not working.
I already tested the GPS reset and test firmware and the NMEA reset.
…
-
Hi, just getting into this with the hope of getting my ecowitt temperature / humidity sensors recognized.
I have this working with the regular rtl_433 code and an SDR, albeit with a small mod to `f…
-
Thanks for the development!
But I need help...
I have a Lora Lilygo T3 V1.6.1 and no matter how much I follow your tutorial I can't flash this :/
I know I shouldn't put this here, but I don't know …
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
Hello everyone,
I am trying to get AFSK (and later AX.25) running on my TTGO T-Beam (Hardware Revision 1.1). The LoRa Module is SX1278. I tried a lot but to make it simple and avoid other sources o…
-
### Operating System
Windows 11
### Version
v3.2
### Python Version
3.10.1
### Chip Description
ESP32
### Device Description
_No response_
### Hardware Configuration
_No response_
### How …
-
## Overview
Over Espressif framework 3.2.0 this library works fine. But using the versions above, the humidity only set the value on 100%.
## Details
- Implementation: like a bme680async exa…