-
### Board
AITRIP 38pin ESP-WROOM-32 ESP32 ESP-32S Development Board (https://www.amazon.com/gp/product/B0B12822SF/ref=ppx_yo_dt_b_search_asin_title?th=1)
### Device Description
This is the bare bo…
-
0. I have a development board and want to port open WiFi to run on it!
1. The RF SOC (ZU47DR) used in this board.
2. Is it okay for me to operate like this?
thanks
-
### Describe the request
Print the output from the `arduino-fwuploader` invocations to the IDE's "**Output**" panel.
🙂 It will be easier for the user to troubleshoot problems that might occur during…
-
Hello.
Flashed esp-link latest stable ver to NodeMCU v3 with CH340 chip.
Flashed nodeMCU works in such ways:
- Web interface works;
- WiFi works;
- Terminal communication trough builtin USB por…
-
### Port, board and/or hardware
Pi Pico w
### MicroPython version
MicroPython v1.22.2 on 2024-02-22; Raspberry Pi Pico W with RP2040
### Expected behaviour
_No response_
### maxi…
-
This esp32 wifi Lora board V1/V2 has some deficiency's in my opinion... Please consider for V3 board.
1. The LiPo battery connector is on the bottom so you have to remove the board from your proj…
-
Hi getting the following error when trying to compile in IDE
```
Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "ESP32 Dev Module, Disabled, Disabled, Default 4MB with spiffs (1.2MB…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Task description
## The current status
Currently, 3rd-party wifi drivers cannot be installed on a per-board basis. Although some drivers are restricted to a specific LINUXFAMILY, many drivers ar…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…