-
I am using Lenovo e 41-15 with amd a4 graphics and qca9377 wifi chip. The qca9377 folder exists in lib/modules/firmware but wifi not working
-
I would like to use 2 SoC. (e.g one exclusively for WiFi and another exclusively for Data Acquisition) I am able to get 2 Verilog files but am unable to synthesis them due to **Verilog Error: (VERI-12…
-
Config:
```
// -*- mode: jsonc -*-
{
// "layer": "top", // Waybar at top layer
// "position": "bottom", // Waybar position (top|bottom|left|right)
"height": 30, // Waybar height (t…
-
Hello. I have a slightly different camera, but I managed to start Root, there is only one problem does not start wifi.Can tell me what can be done?
`[root@IoT-CAM ~]$ /usr/bin/start_wifi.sh
insmod…
-
Hello
I'm using HebiCam to acquire video from RAK5206 wifi camera modules. I have 5 cameras connected to 5 different laptops running Matlab 2018a/Windows 10. Acquisition works fine most of the time…
-
I just recently stumbled accross the [arduino mega wifi r3](https://www.makershop.de/plattformen/arduino/mega2560-wifi-r3/).
This adds an esp8266 on the same board as the mega and serial3 connected t…
-
For the ESP32-S3, the technical docs says a lot about how random numbers work in the MCU.
> 21.4 Programming Procedure
>
> When using the random number generator, make sure at least either the S…
-
### The problem you're addressing (if any)
I am using the NovaCustom NV41 Series laptop with Debian 12 and noticed the Fn + flight mode key just does a soft block and not hard block for WiFi / Blue…
baptx updated
4 months ago
-
Hi,
Thanks very much for your work @whitebatman2 .
As I spent a bit of time to install my wifi dongle EZCAST 5200 on Linux mint 19.2 64bits, I share the procedure I followed to have it working.
…
-
I cannot build on 4.18.5-arch1-1-ARCH gcc version 8.2.1+20180831-1
` CC [M] /media/linux/Downloads/Temp/rtl88x2bu/rtl88x2BU_WiFi_linux_v5.2.4.4_26334.20180126_COEX20171012-5044/hal/hal_mcc.o
C…
olm52 updated
6 years ago