-
Hello,
suddenly my reader stopped working and I dont know exactly why.
I managed to get it working after some help here:
https://community.home-assistant.io/t/norwegian-han-sensors/147283/53
…
-
**Käsitteen tyyppi**
CONCEPT
**Ehdotettu termi suomeksi**
vauvanuket
**Ehdotettu termi ruotsiksi**
babydockor
**Ehdotettu termi englanniksi**
**Tarkoitusta täsmentävä selite**
**Perustelu…
-
Implement interpretation of the scale and unit fields
-
Thanks for a great plugin, this is by far the cleanest AMS HAN solution I have looked at.
In my home, the Energy Meter (a Aidon 6540) is not connected directly to main power, but through a current …
-
The graphs started to show wrong labels after upgrade. Meter is configured as TN 400V.
Have tried to switch between IT/TT and TN without any change.
![Screenshot_20220120-220409_Chrome](https…
-
**Describe your problem**
I didn't received data from meter/import/active/accumulated at midnight today with the 2.0.3 version. All the other 23 hours are fine. Is it only a coincidence or have someo…
-
I am currently writing new code to interpret data from the meter. The new firmware should support any IEC62056-7-5 (Norwegian and Danish meters with HDLC payload) and IEC62056-21 (Swedish and possibly…
-
Eventually got Peaq installed but seems like its not able to control Easee dynamic charger limit.
Peaq allowed current is adjusting, but not the charger.
Charger is responding to manual service call…
-
I have an SlimmeLezer (https://github.com/zuidwijk/dsmr), which uses pin D7.
Is it possible to set it somehow? When I try do configure it in the web interface it only shows the GPIO pins.
It would b…
-
This is more of a question than a bug report. I have recently installed the Pow-U in my Aidon elmeter. The problem is that Pow-U reboots every few minutes. It collects the data correctly, sends them t…