-
```
I did not know where to put this, but as I am a fanatic user of the Eclipse
development environment using the Baeyens Arduino plugin, I succeeded in using
this library as follows:
As I am worki…
-
### Description
Cannot compile for Arduino Nono Every
### Steps To Reproduce Problem
1. Update Arduino AVR Boards definition (just in case) in Tools -> Board -> Board Manager
2. Select "Ardu…
-
Hello, I am a beginner with ROS 2 and micro-ROS. Currently, I have a Raspberry Pi 4 with Ubuntu Mate installed. I needed to install Arduino 1.8.19, which required me to install Teensyduino separatel…
-
```
It would be easier to create third party boards with a bit more help from the
IDE, if it were to provide a #define for the board and mcu_family. Further, the
xmega fuse bits are much different t…
-
```
It would be easier to create third party boards with a bit more help from the
IDE, if it were to provide a #define for the board and mcu_family. Further, the
xmega fuse bits are much different t…
-
Hi, im trying to flash this to a nano to use it to drive the Yaapu telemetry widget on a jumper T16 as it will work with any Rx if you can send it the GPS data but i cant get the firmware to flash to …
-
```
Sanguino currently supports the ATmega644P and '644PA. It is straightforward
to add support for the ATmega644 and ATmega644A.
Part I: Update boards.txt with the following new definition for …
-
Trying to verify the basic example sketch and I get the following errors:
`Arduino: 1.8.7 (Windows Store 1.8.15.0) (Windows 10), Board: "Arduino/Genuino Uno"
C:\Program Files\WindowsApps\Arduino…
ghost updated
5 years ago
-
More a question than an issue, is support for any of the [Teensy](https://www.pjrc.com/teensy/) models on the roadmap?
I noticed there are no teensy models included in this file:
https://github.co…
-
```
It would be easier to create third party boards with a bit more help from the
IDE, if it were to provide a #define for the board and mcu_family. Further, the
xmega fuse bits are much different t…