-
Would it be possible to add mounting holes with room for the head of the screws to the board?
This would allow the boards to be attached securely to a robot.
Perhaps some clearance at edges of th…
-
I'm using a standard [ESP32] board to connect Daikin's S21 (ftka20bv1h) with default config mentioned here: https://github.com/joshbenner/esphome-daikin-s21#configuration-example
but keep show the…
-
There are several ways you can do debouncing. [This](https://docs.qmk.fm/feature_debounce_type) page outlines some of them.
The way Kaleidoscope currently does debouncing is called "defer" in the …
-
Hello
I made the circuit according to the schematic you used to have
But the board doesn't work
ESP8266-07 works well on board but DMX does not work
-
### Platform
ESP8266
### Assembly
I did the assebly by myself
### nRF24L01+ Module
_No response_
### Antenna
circuit board
### Power Stabilization
Elko (~100uF)
### Connection picture
- [ ]…
-
I am trying to implement one of the starter circuits using your library. This simple Arduino code, causes the LED to light up brightly and blink accordingly (everything seems correct):
```
void loop…
-
We have successfully implemented the SDIO solution On my imx6ul board, and test is OK.
but when produce first batch of circuit boards with new Wi-Fi mode, A new problem arises.
esp32 driver could be…
-
`epd_push_pixels` will always paint full screen on s3 board, for the macro `RENDER_METHOD_LCD`.
What should i to do for partial area clear?
-
Hey there,
I am new to ROS and Baxter. I am learning ROS Hydro and for my project i need to use a Baxter to grab a printed circuit board. I have a vision module that detects the printed circuit board …
-
I'm really keen on the project and would love to try it out as soon as possible. One thing that I'm struggling with, is the possibility to either use it with an existing esp32/esphome or somehow get a…