-
I've been pointed to this line
https://github.com/pytorch/pytorch/blob/12528990f8c56deb7ce1c699e6da63d82c115968/aten/src/ATen/native/Convolution.cpp#L526
where we can see which choices we have whe…
-
Hi, I am attempting to install Tailscale but have an error saying the TUN module is unavailable. Do I need to make a new image and include the TUN module in the kernel, or is it something that I have …
thbeh updated
6 months ago
-
When i use the gpu or cpu in high usage the screens loses signal or become black, probably any voltage problem
i am using rtx 3050 and intel core 5 12400 with 500W supply
-
# perf
WARNING: perf not found for kernel 5.12.10-051210
You may need to install the following packages for this specific kernel:
linux-tools-5.12.10-051210-generic
…
-
Hi
I have Problem with ASUS flow z13 CPU performance, same as this seems CPU power limit to **15w** in linux !!
[really-low-cpu-12900h-performance-in-linux-manjaro](https://linustechtips.com/…
-
Low latency settings require predictable task scheduling that reduce or eliminate both latency and jitter as much as possible. Since power states and turbo boost cause spikes in latency and thus also …
-
Hi,
FYI, I was curious how BLIS fares now against slightly newer versions of MKL/OpenBLAS and also AMD's fork.
## Zen2
### Zen2 experiment details
* Location: https://docs.computecanada.ca…
-
Hi all,
Recently, I have been testing this tool in my AMD Ryzen 5 PRO 2400G.
While I managed to change the frequency to overclock my CPU, I haven't been able to modify the CPU core voltage. For m…
-
My Surface Pro 7 has erratic thermal throttling behavior under Linux. The CPU will run fine at roughly 2.4GHz for a while when pushed. But will drop to a mere 200MHz. After it cools down a bit it will…
-
Pornin says here https://github.com/pornin/crrl#benchmarks:
> If frequency scaling ("TurboBoost") is not disabled, then you'll get wrong and meaningless results.
The way `dudect` is designed is …