-
I've created the sensors module which (for now) has support for _BME280 temperature/humidity/pressure sensor_ and _1-wire devices_ (for now DS1820 temperature sensors family).
I've tried to write the…
-
Hello,
I apologize for having put a PR in the master branch instead of the dev branch #1976.
I also understand after reading the "contributing guidelines" that I should have started an issue rather …
-
Please provide any sample for users for sleeping mode
As sample a temp sensor reporting every 10 minutes or/and a temp sensor reporting if values was chaged by 1°C
Reading documentation it is not cl…
-
-
Hi
I am loopeing thru a dir request in order to analyse the devices.
if a DS1820 I wnat to read the temperature which goes well
## if a DS2438 I want to read Temperature, VAD and VDD - this will fail…
-
Is there any forecast as to when basic sensor support such as dht, onewire and display (ssd1306) would be available ?
Also, I saw another thread related to this, but disable_irq() and enable_irq() …
-
Hello,
I made souliss system with the gateway i 10 on / off nodes and works perfectly,now the question is how to make temperature (DS1820 or LM35 ) sensor node, right can work wirelessly with NRF24L0…
-
This issue is created to collect all the tasks we need to do before the 3.0.0 Release (Was 2.2.0 but this release contains so much useful features and fixes that it deserves a major version).
### S…
slaff updated
7 years ago
-
I think it could be a good idea to implement "antifreeze safety feature":
add the temperature sensor to arduino and if all goes TOTALLY wrong (e.x. no connection to EQ-3 MAX! cube for long time) an…
-
Feature request to add support in Pi4J for the GPIO bit-banging 1-wire Linux kernel driver:
pi@raspberrypi:~$ sudo modprobe wire
pi@raspberrypi:~$ sudo modprobe w1-gpio
pi@raspberrypi:~$ sudo modpro…