-
Hey I just wanted to double check about the pinout.
TX (sender) is A0
RX (receiver) and the output pin is 6
Am I reading this correct?
-
I’m working with Atmel SAMD microcontroller on Adafruit Feather M0 board. Looking at the documentation here: https://www.arduino.cc/reference/en/language/functions/analog-io/analogwrite/, I read that …
-
I'm using a MKR1000, and tried for UNO aswell.
I made the modifications indicated in previous issue #0afd522, both in I2C_Demo.ino and in ssd1327.cpp but got a this error message :
`
C:\Users\xxx\…
-
I am using this sensor on the Arduino Due together with a relatively complex logger. Without this sensor, everything works fine. Adding this sensor and trying to recover full profiles, I run in weird …
-
**Issue by [atmoos](https://github.com/atmoos)**
_Sat Aug 25 15:23:19 2018_
_Originally opened as https://github.com/ERNICommunity/dust-measurement-network/issues/29_
----
In order to store the dev…
-
- Arduino board: Feather M0 RFM69
- Arduino IDE version: 1.8.5
- Library version: 1.0.2
Issue:
Each measurement is made separately. In fast changing voltage and current situations, the readin…
-
seesaw_crickit_test.py fails with a ValueError Invalid touch pin
This is not surprising as the code tries to use ss.touch_read with crickit "pins" range(4) - 0 to 3 (no pin mapping).
In the Cricki…
-
I am now using the Arduino Menu with a click encoder, and using this library (as is required by the Arduino Menu library), I am unable to use this on pins that have hardware interrupt (it simply does …
-
administrator@raspberrypi:~ $ python3 rgb_display_ili9341test.py
Traceback (most recent call last):
File "/home/administrator/rgb_display_ili9341test.py", line 25, in
spi = busio.SPI(clock=b…
-
Many experimenters are using the LMIC for prototyping with new hardware.
It would make sense to add a diagnostic sketch that tests the hardware interface in a simple way, and reports errors in a mo…