adafruit Adafruit_CircuitPython_seesaw issues

adafruit / Adafruit_CircuitPython_seesaw

seesaw helper IC driver for circuitPython

MIT License

59 stars 35 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

rotary-set seems busted

#135 konsumer opened 4 months ago
1
file attinyx16.py analog pins only for output? (the text of the definitions tells us)

#133 PaulskPt opened 6 months ago
0
file attinyx16.py update text info please

#132 PaulskPt opened 6 months ago
0
seesaw.py - incorrect reading below 0C

#131 sciencedude1990 opened 6 months ago
0
Adding an additional chip id for Attiny 1616

#130 scirelli closed 7 months ago
3
Issue 128: Fixed an error message that was using the wrong number system

#129 scirelli closed 7 months ago
1
Error message prints wrong number system

#128 scirelli opened 7 months ago
2
FT232H Connected to Neopixel Driver gives an Invalid hardware ID

#127 scirelli opened 7 months ago
6
Update seesaw_quadrotary.py to change color of neopixel based on direction of rotation

#126 logandgsmith closed 6 months ago
1
Fix `set_pwm_freq()` for ATtinys

#125 caternuson closed 9 months ago
0
Update enocder example with code comment

#124 caternuson closed 9 months ago
0
Update EEPROM I2C addr for ATtiny seesaw variants

#123 caternuson closed 9 months ago
0
Update get/set_i2c_address() for ATtiny variants

#122 caternuson closed 9 months ago
1
MIssing explanation of why Pin 24 is required for rotary encoders

#121 erichiggins closed 9 months ago
9
Adding example for pc joystick

#120 BlitzCityDIY closed 1 year ago
0
Gamepad I2C Initialization and read errors

#119 EAGrahamJr closed 1 year ago
2
add support for different chip detection + quad rotary demo

#118 ladyada closed 1 year ago
5
Add Gamepad QT compatibility, example.

#117 kattni closed 1 year ago
0
Update set_pwm_freq() for ATtiny variants

#116 caternuson closed 9 months ago
1
Adding examples for ANO rotary encoder

#115 BlitzCityDIY closed 1 year ago
2
CRICKIT Hat for Raspberry Pi does not report SeeSaw temperature

#114 EAGrahamJr closed 2 months ago
3
Seesaw Capacitive Moisture Sensor's highly random data output, maxing out at 1015 rather then 2000 and maxing out super soon even in dry soil.

#113 Sandesh4242 opened 1 year ago
2
Support ATtiny1616 and ATtiny816 boards

#112 todbot closed 1 year ago
4
Added commented out board.STEMMA_I2C with explanation

#111 evaherrada closed 1 year ago
0
Add path check for neopixel.py

#110 caternuson closed 2 years ago
5
Fix neopixel for python version of adafruit_pixelbuf

#109 Neradoc closed 2 years ago
0
Ignore last 2 bits of digital input, only on boards without long ints

#108 carlfj closed 2 years ago
1
OverflowError small int overflow on QT Py SAMD21

#107 carlfj closed 2 years ago
6
Use pixelbuf

#106 Neradoc closed 2 years ago
0
seesaw.neopixel is incompatible with regular neopixel protocol

#105 MauiJerry closed 2 years ago
4
fix default color order

#104 ladyada closed 2 years ago
1
Change NeoPixel pixel order default behavior?

#103 caternuson closed 2 years ago
2
Fix incorrect RGBW NeoPixel output

#102 caternuson closed 2 years ago
1
RGBW NeoPixel support slightly broken

#101 caternuson closed 2 years ago
5
Keypad

#100 ayodhyadhameesha closed 2 years ago
1
No I2C device found at address: 0x36 that is suggested in the code

#99 Absol3000 closed 2 years ago
1
Do not blank out the value read for pins PA30 and PA31.

#98 mkende closed 2 years ago
6
Make AnalogIn.value return always 16 bit?

#97 caternuson opened 2 years ago
3
allow faster reset

#96 ladyada closed 2 years ago
0
Adding Arcade QT examples.

#95 kattni closed 2 years ago
0
adding multiple qt rotary example

#94 jedgarpark closed 2 years ago
0
two encoders at once?

#93 troylball closed 2 years ago
14
Can't use addr 0x38 for STEMMA Soil Sensor on Funhouse

#92 GH15ADF closed 2 years ago
2
Remove obsolete references to ustruct

#91 dhalbert closed 2 years ago
0
Propagate delay param from read() to analog_read()

#90 todbot closed 2 years ago
4
Variable Frequency PWM for ATtiny8x7 Seesaw Breakout

#89 rsbohn opened 2 years ago
0
Linted

#88 evaherrada closed 2 years ago
0
Updating for ATtiny8x7

#87 kattni closed 2 years ago
0
Adding ATtiny simpletest.

#86 kattni closed 2 years ago
0
Add ATtiny8x7 and examples

#85 ladyada closed 2 years ago
2