-
Hi there, great project.
I've attempted running `spd_dump` on Ubuntu 22.04 with configuration for a `sp9832e_1h10_gofu` device and using signed fdl1 and fdl2 obtained from a firmware dump but havi…
-
I'm cloning this repo to make some modifications to customize. However, I've noticed that some CVEs which were confirmed and fixed do not get patched in this repo. To enhance the availability of my p…
-
same as topic
-
After update [TYZS13] (see log) I couldn't communicate with the adapter in Zigbee...
Elelabs_EzspFwUtility.py flash -f efr32mg13p-v8-6910-57600.gbl -p COM13
Elelabs_EzspFwUtility: Generic Zigbee…
-
Hi,
I've come across with a problem regarding the connection of my nRF52840-DK board to my Raspberry Pi 4B to start the otbr-agent service. I followed the instructions indicated here: [https://ope…
-
After #373 _openfortivpn_ must be run with root privilege. There are multiples reasons for that. It would be worth re-investigating whether there are ways around that, or at least whether dropping roo…
-
ghost updated
3 years ago
-
## Packetized approach
Goal: allow Tockloader and users to communicate with different consoles on a board over a shared UART channel.
- [ ] Implement HDLC as the link protocol to enable differen…
-
**Description**
Some time ago tried named sequences with parameters again and I stumbled over the fact, that `boolean` parameters seem to be supported in some way. However, the parameters cannot be u…
-
Good day. Have you figured out a frame merge mechanism to get a full IP,
аnd how to unite on the counter?