-
**Bug description**
Unit is showing high RX Fail count and frequent restarts - raised at request of @proddy after discussion on Discord.
**Steps to reproduce**
Run the EMS-ESP32 and look at data …
-
**Bug description**
After installing the 3.4.0b9 version (updating from 3.3.1 today), ems-esp shows wrong UTC time. It is shifted by 1 hour, regardless of manual input or NTP. I am in the Prague/Eu…
-
The core ESP32 arduino framework has been upgraded to [v2.0.0](https://github.com/espressif/arduino-esp32/releases/tag/2.0.0) and [PlatformIO](https://github.com/platformio/platform-espressif32/releas…
-
Hello all, I hope I posted in the right section...
I managed to set up my S32 gateway (via connection to the thermostat wires).
The problem that I am facing is that my thermostat (RC10) is not rec…
-
**Bug description**
*I am sending REST command to change dhw mode on thermostat. As result i got _Call failed with error: callback function failed_ . (Error). On previous software thre was another e…
-
**Bug description**
I receive several errors and warnings in HA MQTT integration after upgrading to 3.4.0b10 from b9. I also tried removing and re-adding MQTT, multiple restarts of EMS-ESP and HA.
…
-
My device running v3.3.1b0 firmware is restarting/rebooting by itself.
EMS connected to Junkers cerapur.
Approximately every 4-6 hours is restarting. Max uptime is 10 hrs.
Anything I could check…
-
**Bug description**
`~/boiler_data` does not contain boiler data for all boilers, when cascade is used
**Steps to reproduce**
1. Connect ems-esp to an EMS bus with for example: Cascade MC400 an…
-
**Bug description**
I'm using v3.4.0b18
Using EMS-ESP, I cannot set the heat pump to always cooling. Only options provided are
* auto
* summer
* winter
When setting the heat pump to `always co…
-
**Hardware**
EMS-ESP: v3.3.0b3
Boiler: DeviceID: 0x08 ProductID: 95 Version: 43.10
Condens 2500/Logamax/Logomatic/Cerapur Top/Greenstar/Generic HT3
**Problem**
"heating activated" and "ww ac…