-
I am using ChipSHOUTER with an external trigger circuit(fpga) connected to my target.
After few runs, I end up getting the fault["fault_high_voltage", "fault_trigger_glitch"]
I am suspecting t…
-
the pss stores lots of energy very cheap wich wich allows people to mostly skip power gen in EV-LUV
sisne the there is now the LSC wich while stil has problems but is more balanced sisne it is way mo…
-
I've reflashed my Multigeier and I'm no longer able to connect to the AP as well the ESP32 didn't connect to my WLAN.
```
19:43:28.728 -> GEIGER: Logging initialized at level 0.
19:43:29.147 -> G…
-
Hi
I have one of your programmers and I'm struggling to make it burn bootloaders. It fails & then refuses to communicate at all with the chip. I've tried it with 412s & 1614s & the failure is consist…
-
Since Latest commit, i get an error, No target power.
If i move 5V from the updi header, to 5V on the arduino ISP header, it works, and flashes the attiny412 (need 2 tries, as it should atm)
Usi…
-
Can we get more options for Startup Time or a less aggressive minimum setting?
If using the ATtiny 0/1/2 parts as a HV programmer and the target has UPDI in GPIO mode, the HV pulse needs to be appl…
-
If this works, will also allow UPDI to be fused as Reset and GPIO for non-optiboot definitions.
-
The "even bigger laser" remains a doorstop and would be a useful addition to the DoES portfolio.
Discrete tasks in order would be :
a) location and orientation to be determined / agreed
b) bulk…
-
Looks like it's supposed to be declared static (per readme)... but it's not, what readme suggests doesn't work:
```
#include
void setup() {
Event0.soft_event();
//Event::clear_user(user::t…
-
When will it come for VT-d? What are the problems at the moment? What has to be modified? Will this ever work? Thanks.