issues
search
Dlloydev
/
jtag2updi
HV UPDI / UPDI programmer software for Arduino (targets Tiny AVR-0/1/2, Mega AVR-0 and AVR-DA/DB MCUs)
MIT License
27
stars
8
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Is it possible to get this running on an Arduino Duimillanove/Uno?
#19
DeepHorizons
opened
1 year ago
0
Unstable trailing edge of stopbit pulse while using software UPDI I/O
#18
kosilin
closed
2 years ago
3
Probable bug
#17
dduehren
closed
3 years ago
10
2. series
#16
DanSkareda
closed
3 years ago
1
In this diagram, it is not clear where to connect tinyAVR?
#15
P55-rgb
closed
3 years ago
9
The programmer does not work in any of the three modes: UPDI, HV, PCHV!
#14
P55-rgb
closed
3 years ago
1
Curious behaviour
#13
iansexton
closed
3 years ago
2
Atmega 2560
#12
grogcw
closed
3 years ago
2
No target power
#11
nieldk
closed
3 years ago
7
Burn bootloader
#10
iansexton
closed
3 years ago
2
Question for AVR-DA
#9
sstaub
closed
3 years ago
7
High Voltage Programming on ATtiny3216
#8
Nbelles
closed
3 years ago
36
ST662ACD charge pump is now obsolete
#7
Dlloydev
closed
4 years ago
2
Free up 3 pins on ATtiny16x4 (PA4, PA5 and PA6)
#6
Dlloydev
closed
4 years ago
0
Add HV support and pinouts for all ATtiny 0/1 listed in parts.h
#5
Dlloydev
closed
4 years ago
1
HV UPDI tolerance requires isolating PA0 on Microchip Xplained boards
#4
Dlloydev
closed
4 years ago
1
Possible to run on ATtiny?
#3
Nbelles
closed
4 years ago
9
Workaround to allow UPDI to be fused as Reset or GPIO for non-optiboot definitions
#2
Dlloydev
closed
4 years ago
0
Trouble uploading using Arduino Nano HV UPDI Programmer
#1
Nbelles
closed
4 years ago
10