-
Hi, is the support also avaible for TMC2100?
If yes how does this work?
-
### Describe the bug
No motors detected after upgrading to RC3.
### To Reproduce
Installed RC3 and got the following error at the motor screen.
![unknown (1)](https://user-images.githubuserc…
-
### Describe the bug
Betaflight 4.3.x fails to recognize the SD Card.
@hydra
### To Reproduce
Get any Flight Controller with an SD Card reader. In the CLI, paste in "SET blackbox_mode = …
-
I have several people interested in using grblHAL with servo motors (not the RC hobby kind). These have an error signal that gets asserted when something bad happens - like losing steps. I think the …
-
I used to have a XY hysteresis correction to compensate for backlash which called for
```
extern Hysteresis hysteresis;
extern long position[4]; // defined in planner.cpp
```
in `Hysteresis.h`
but…
-
**Submitting author:** @askuric (Antun Skuric)
**Repository:** https://github.com/simplefoc/Arduino-FOC/
**Branch with paper.md** (empty if default branch):
**Version:** v2.2
**Editor:** @gkthiruvath…
-
I downloaded tar in accordance with these two.gz file and follow the steps. #4071 #1864
When I run the last step:python setup.py install
I have an error log:
SyntaxError: invalid syntax
…
-
### Describe the bug
Quad would not arm, although there are no arming disable flags shown.
Motors run smoothly from motors tab in BF Configurator.
When arming switch is flipped on radio, ESCs…
-
I tried to configure on RobinNanoV1.2 UART mode(on axis y) with drivers tmc2208, tmc2209, according "how to" on link https://www.youtube.com/watch?v=7ShcFKXrVHo.
Everything worked on first time, but …
-
I got some strange layershifts egen connecting SKR 1.4 T to my Anet A8. With original motherboard the prints get just fine.
I have tried 2 different turbo boards, 5 cheap TMC2209 steppers, and last t…