-
```
OpenOCD JTAG (Flyswatter) support would be nice.
http://elinux.org/BeagleBoard#JTAG
Steps necessary for this:
* OpenOCD compatible JTAG hardware interface with FTDI's FT2232 chip, e.g.
Flyswat…
-
Hi, I am running into the following issue when attempting to connect to the device via openocd after pwning/demoting the device and configuring Tamarin to JTAG mode (Similar to #4, however they seem t…
-
I've got this FPGA board that I wish to support. It's got multiple…
-
```
Прошивалась плата NVCom-01MEM-3U. Программа mcprog
была собрана из исходных кодов с mingw (была
только отключена библиотека lintl).
Последовательность шагов, приведшая к
проблеме:
0. Делалась …
-
```
OpenOCD JTAG (Flyswatter) support would be nice.
http://elinux.org/BeagleBoard#JTAG
Steps necessary for this:
* OpenOCD compatible JTAG hardware interface with FTDI's FT2232 chip, e.g.
Flyswat…
-
Sometimes the flashing process is stopping around 3-4% when flashing a binary to the GAP8 from the cfloader.
I have not investigated this deeply, but it seems as if the GAP8 is blocking for some rea…
-
Sayma s/n -8 worked on bench but in crate reports error when flashing.
```
$ artiq_flash -t sayma --srcbuild ~/artiq-builds/artiq_sayma_20180612_f8627952c8
Design: top;COMPRESS=TRUE;UserID=0XFFF…
-
能正常刷写固件，但是刷写完成后屏幕没有显示，电脑安装了驱动也没有识别到串口，我不知道是不是我的电路有问题，有没有遇到这样的情况，该如何排查？
clion刷写日志
Open On-Chip Debugger 0.11.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen…
-
Do you think there would be enough space on the Uno to add in XSVF programming such that the ATF150x CPLD chips could be programmed via JTAG? They also work with WinCUPL...
I figure since afterburn…
-
```
OpenOCD JTAG (Flyswatter) support would be nice.
http://elinux.org/BeagleBoard#JTAG
Steps necessary for this:
* OpenOCD compatible JTAG hardware interface with FTDI's FT2232 chip, e.g.
Flyswat…