-
****
## Current Behavior
LED Strip LEDs that are assigned to BATTERY function always give green light - even when battery voltage is low
## Steps to Reproduce
1. Configure Warning Cell Voltage…
MrMap updated
4 years ago
-
I am suggesting to add a note at the top of the section saying there is a limit of one LED strip on the robot using the PWM port method of controlling them. We tried hooking up 2 strips to the Rio, a…
-
```
I want to Use 5050 smd Led strip insted of RF-W2SA50TS-A34.
But I noticed that Led strip forward current is 150mA (and the RF-W2SA50TS-A34
is only 30 mA) - see attached datasheets.
I assume tha…
-
The following program works flawlessly on esp8266 nodemcu
but will not work on esp32 wroom da
It seemed at times i was able to blankLEDs but when I went to turn on an individual....it will not work.…
-
### The problem
In my kitchen, I want led strips (SK6812) on top of the kitchen cupboards, as well underneath them to shine on the counter.
For this situation, I intend to use a single ESP32E config…
-
This is a relatively recent development from QMK, the ability to use the VCC Data and GND pins on the microcontrollers to enable support for these types of LEDs
It would be really useful for the IC f…
-
-
**Describe the bug**
Brightness level mapping on Warm White/Cool White is working OK
Brightness level mapping on RGB mode is not working OK
Same issue as described in this integration of Local TU…
-
Hey Lukse!
https://github.com/jnweiger/ws2812_sprites/tree/master/carambola2/package/ws2812_draiveris
I've hacked on your driver, and extended it quite substantially. I am driving a panel with 270 le…
-
Could you please help me find the way to have possibility of turning off/on LED strips connected to Wolf PDB using my Taranis QX7S switches or knobs?
Setup: Wolf Reverb PDB OSD Kit rev 2, Kiss FC v2…