-
Either via UART, UART over power line, or Bluetooth
UART -- nRF52840 has 2 UARTs, so we can use the other one
UART over powerline -- save on cabling, and reuse the existing power connection
-
I am using the dual IMU code for MPU9250 with an ESP32 board. I have commented out the RTC related code and change IMU idetification ids to 0x73.
The second IMU is not detected when I run the code.
…
-
After boot no NVME devices found. If I trigger pci rescan via `echo 1 > /sys/bus/pci/rescan` NVMe device is found but non-functional:
```
[ 46.034631] pcieport 0002:00:00.0: bridge configuration…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
* [ ] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
先刷了别人编译带pbboot的固件，然后在升级编译的固件，可以启动，但是WAN口失效的，没无线，
请问下百兆的R3，这个固件是要修改什么编译的吗？怎么我编译WAN口失效 没…
-
The fixedReserve feature in MOST and MATPOWER allows setting a fixed reserve requirement in power units (i.e. in MW).
The system can be divided into zones, and a fixed requirement can be set for each…
-
I've read the title page https://github.com/fpoussin/MotoLink but I am still not sure what this is and what is the status of this project.
Is this an auto-tuning software with an stm32 device as a …
-
Hi Ben,
First of all, great project, I'm trying to replicate your setup. and have successfully installed all components/dependancies by following your instructions
I have tried to start the appl…
-
So here is the topic. I noticed that it crashes when switching left modes under Frequency knob
-
### Describe the bug
The flash driver is unable to erase or write the flash chip.
The Rocket was sold with two different flash memories and mine had a slow memory installed.
With the software v…
-
Is there some examples or standard libraries for testing components like wishbone, uart, spi, ... with chisel-testers2 ?