-
Linux. Firmware 2.5 compilation.
Throws an error when do Make or MK_ALL.sh.
Apparently I don't understand something, but I suppose that since there is an include, it means that the library must be s…
-
In my fork on the `eeprom` branch I implemented reading from and writing to the EEPROM of the MC: https://github.com/AHorneffer/micronucleus/tree/eeprom
(This was already discussed 2.5 years ago in …
-
Hello,
I would like to suggest that the uC Attiny85 bootloader be automatically burned before the sketch, when the upload is performed using the programmer.
This uC can operate with 1MHz, 4MHz, …
-
Hi!
I'm not sure what to check, but after burning bootloader on my MH-ET t88 there ist no device on USB and upload via USB doesn't work. I flashed the bootloader (also manualy) with USBasp and upload…
-
@SpenceKonde, I started working on integrating the Micronucleus support in your core. The board manager in Arduino has to know where the Micronucleus tools are located. As far as I can tell this can …
-
Hi everyone,
i write to you for help me in a process ( right or not ) to upload the right bootloader on my AT85.
Usually i use my Digispark ( base on AT85 ) for my project, but i would like to us…
-
I am trying to get the latest commit to Master for bug fixes. I downloaded the Zip file and put it in the hardware folder:
```
bill@bill-i7x58 MINGW64 ~/Documents/Arduino/Hardware
$ ls
ChangeLog.m…
-
Hi Armin,
When programming "upgrade-t85_default.hex" [V2.5, commit f90621b] into a DigiSpark and then uploading the DigiSpark "Start" example, USBtreeview shows the DigiSpark Bootloader for 6 secs an…
-
I have no idea if it is the Hardware, Bootloader or OSCAL:
I played around with the new TinyCore on the t85 Digispark (Software Serial), but than no respond any more.
(I can't remember if it was the…
-
Hi Armin,
As the subject says, the fast_exit_on_no_USB does not seem to work.
Using a genuine Digispark micro-USB board.
Steps to reproduce:
1. https://github.com/ArminJo/micronucleus-firmware#ins…