-
I got it installed, and got confirmation that it is connected by the M102 s-1 and M119.
But it is always triggered and always shows 0.0mm no matter if it is close to a metal surface or not.
When…
-
The device is here https://www.obsbot.com/obsbot-tail
It has an api that access over http for basic control.
[OBSBOT Tail HTTP API Document.pdf](https://github.com/bitfocus/companion-module-req…
-
*bdiggs:*
Enabling 802.11r in LuCI auto populates with two default settings that break 802.11r functionality for most devices (though tested extensively on latest Apple iOS devices).
Bug: The cur…
-
### Device type and model (or SN)
Midea 00000Q11
### The description of new feature
The FollowMe command is telling the air conditioner a more accurate room temperature value to be used instead of …
-
hello, I try to use bestest_air to do a control test. I find that the "con_oveTSetCoo_u"(Zone temperature setpoint for cooling
) is from 296.15K to 303.15K. It seems that this zone temperature setpoi…
-
Setup code push for over the air updates
-
The seller does not have a blower for us.
The blower is shown here: https://laboratoryb.github.io/camfive/docs/Laser_Machine_INSTALLATION_MANUAL.pdf#page=8
![image](https://github.com/user-attac…
-
> This 2-minute video aired on KNTV-11 in July 1989 and catches me in Silicon Valley immersed in the early development of the BEHEMOTH bicycle. Fortunately, the Winnebiko II version was still intact, …
-
If we start a simulation with these initial conditions (sediment with black in the air phase - red is air, blue is water) then at the third checkpoint (icnluding zero) the water surface jumps over the…
-
Hello, Dr. Jiao,
I used the loopback test mentioned in the document. Does "Over-the-air-loopback" here mean that the data transmitted from the TX antenna is received by the RX antenna? I found that …