-
In a transmission grid, synchronous generators could sometimes be controlled with Q value instead of U value. These generators need to be modelled in pandapower as sgen for powerflow analysis. However…
-
In the case ieee9 bus test,I changed the default psse format data into the bpa format data, but something went wrong:
At first ,I want to use my own data to finish my project, but it always went w…
-
hi,sir , you job is very good, I love it .now I am trying to write a program about harmonic state estimation using opendss_python,and I have learned something from your program.I need extract data abo…
-
CT and PT ratios only work with line drop compensation. it is common for commercial tools to always specify all control modes in \p.u.\, i.e., 120 V bandcenter +/- 1 V bandwidth (rather than 7200 +/- …
-
I have impedances with ideal transformers at the end in my data. I have added this to pandapower by adding the columns 'ur1_kv' and 'ur2_kv' to the impedance table and calculate an off nominal tap rat…
-
Basically, I have two Symo Inverters with two different IPs
As long as I enter one IP or the other, everything is fine.... for one inverter at a time
I must do something wrong with the scope... shou…
-
Some of the Jupyter-Notebooks using the new Python Interface (see #22 ) take multiple minutes for a full run-through, which causes the test pipeline to run quite long. This table aims to summarize the…
JTS22 updated
2 years ago
-
Hello,
I'm modifying the inverter code, and I need to retain values from the previous time step. I do this, similar to some code I saw elsewhere, by evaluating when t0 changes, and storing values f…
-
Hello,
I'm modifying the inverter code, and I need to retain values from the previous time step. I do this, similar to some code I saw elsewhere, by evaluating when t0 changes, and storing values f…
-
## Please describe what was the cause of the issue?
When using the `P_CONSTANT` governor model with `diesel_dg` the output power bears no relation to the set power.
This is observed in a very simp…