-
As part of the effort to create an EPS32 based Golioth Frog Sensor Ribbit-Network/ribbit-network-frog-hardware#126 , we need to find and integrate drivers for the Frog Sensors into the ESP-IDF framewo…
-
Getting the humidity values of the SCD30 sensor is producing an error during compilation.
![blockly_bug](https://user-images.githubusercontent.com/2471172/185918004-3993bf15-94c2-4a94-91e0-3ae99e9e…
-
### The problem
The ESP32 module seems to be reseting from 5 to 15 minutes after booting
### Which version of ESPHome has the issue?
2022.1.4 and also tried beta 2022.2.0b1
### What type of instal…
-
Hi,
I read your comments at the original repository as well as your document here.
Thanks for all the docmentation you provided.
I built a new board, based on the original Grove board and your …
-
### PROBLEM DESCRIPTION
The problem occurs with versions from Tasmota v10.1.0 on, including the current development v11.1.0.3, and did not occurr from v9.2.0 (first version being used here) up to and…
-
Hello, I'm interested in building this project, or some variation to it. You've mentioned in the README that the PCB was designed with KiCAD, which I've installed and opened the project with. I'm al…
-
### PROBLEM DESCRIPTION
The console commands for the SCD40/SCD41 sensor are not recognized (scd40cal, scd40test, etc.) I compiled my own binary with support for both the SCD30 and SCD40/SCD41 sen…
-
Compilation error in Plarformio at scd30_modbus.cpp:68:70
`void SCD30_Modbus::scd30Write(uint8_t func, uint16_t cmd, uint16_t data,
uint8_t addr = SCD30_MODBUSADDR_D…
-
## Summary
I'm using this library in my project with a wrapper that I wrote, CanAirIO Sensors Library. With the old version, AHT10 library and using other sensors at the same time, it was working f…
-
### Bug report
**What is the problem?**
It was noticed that the AC mesh is no longer booting when it is upgraded to gluon 2022.1.2. This was also noticed on following other devices (but debuggin…
ecsv updated
8 months ago