-
### Description:
Add support for SPISlave mode like the ESP8266 [SPISlave](https://github.com/esp8266/Arduino/tree/master/libraries/SPISlave) arduino library..
-
Has anyone tried the hard I2C and SPI modules in the UltraPlus FPGAs and got them working? I have spent the past few days tinkering away using the information in these documents:
http://www.lattice…
-
Mentioned in https://www.rundfunkforum.de/viewtopic.php?p=1747213#p1747213
In case of a sync loss, SPI will no longer blink green. You need to change the DAB frequency and retune.
-
I have finished building your project and it works correctly, the problem I have is that the touch screen does not work, I use a Chinese display with reference KMRTM28028-SPI, (ILI9341), I cannot find…
-
work
Flash_Jpg_DMA.ino
view bgr to rgb
TFT_eSPI\TFT_Drivers\ST7789_Init.h
code
```c++
config
#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
or
#define TFT_RGB_ORDER TFT…
-
Have to further investigate.
LCD always works, Flash Chip only works if LCD is not connected and LCD Driver is not activated or Flash comes first in Init. (Not yet tested if it only works on init ti…
-
One possible solution to protect flash and distinguish between what app can reach a certain part of the flash, is to only allow fw to access the SPI flash. In that way the app may use functions throug…
-
Hello,
just wanted to inform you here that there is obviously something wrong with the SPI communication in the beta editor.
I am currently developing a library for an Analog-Digtal-Converter and no…
-
On the hardware, I use external high-speed crystal oscillator 50MHz, the program set pll1_q_ck 10MHz, SPI 1MHz, do not use hardware CS, CS use ordinary GPIO push-pull output. After initializing SPI, p…
-
hello,bro,i am diy my espboy, When I was compiling the Arduino project, I found that nbSPI was not working.
gpio16 as reverse tft cs pin, when high level .cs pin is active.
gpio 12(the spi miso pin)…