-
### Board
ESP32
### Device Description
A LilyGO TTGO-LORA32.
### Hardware Configuration
Only USB.
### Version
v2.0.3
### IDE Name
Visual Studio Code & ESP-IDF
Edit: I a…
-
### The problem
Updated the firmware of my Egardia gate-03 gateway this morning. Also installed HA core 2023.4.0 and after restart of HA the integration failed to load.
Logger: homeassistant.setup…
-
### Category
Hardware Compatibility
### Hardware
T-Lora v2 1.6
### Firmware Version
2.3.9.f06c56a
### Description
Device: T-LoRa V2.1-1.6
Firmware: 2.3.9.f06c56a Alpha
Error: …
-
Hello, I made a RPC project in esp-idf, but it did not work. He showed me that he was subscribed to the RPC, but I got no response from the terminal when I sent an RPC from Thingsboard. but when I res…
-
I'm trying to compile a simple test that just receives data in a loop using ESP-IDF (code shown below).
The build fails with the following error:
```
In file included from /home/kjartan/Documents…
-
Before we can properly start this project, we need to first find out exactly what LoRa module we have and what its capabilities are. We're also going to need to learn how we should program the board w…
-
Hi, which resistor has to be removed when using the ipx connector? I can't find the information.
Thanks Dominik
-
Was trying to compile a config for a ttgo-lora32-v1 and there appears to be many dependency errors that cause PlatformIO to fail compilation.
Even upon editing the .ini file to include the older vers…
-
I've got an old TT-GO T-Beam and a few Heltec WiFi LoRa32 boards and one of the issues I'm having is that we want to hook up both an SDS011 and a BME680 to the Paxcounter at the same time but on these…
-
I noticed that in `SX127x::configFSK()`, the io-homecontrol compatibility is set to off (`RADIOLIB_SX127X_IO_HOME_OFF`) and there is no high level method/function to enable it.
Is there a specific …