-
Can you please run a test against your MSR with the new `MagTxLFCarrier` TX method? Perhaps do a few sanity checks yourself if the messages are fine. There's a new branch with a rather crude implement…
arha updated
7 months ago
-
I am new to LoRa.
I have a LILYGO T-BEAM v1.1 with an SX1262 connecting to a Dragino LPS8-V2 gateway, attempting to join The Things Stack.
During an OTAA attempt, The Things Stack shows:
```
…
-
# I2C Linux
## 1. I2C 简介
- 一种串行、半双工总线；主要用于近距离、低速的芯片之间的通信
- IIC总线有两根双向的信号线：数据线 SDA 用于收发数据，时钟线 SCL 用于通信双方时钟的同步
- IIC总线硬件结构简单，成本较低
- 一种多主机总线，连接在 IIC 总线上的器件分为主机和从机；主机有权发起和结束一次通信；从机只能被主机呼叫
- 当总线上…
-
Hello,
I was using avrdude to flash my MCU from an old Raspberry Pi 3 and recently move to the new Pi 5.
I was used to flash using this command:
```shell
sudo avrdude -p m162 -c linuxgpio -U flash…
-
Hello
I've got a spare one of these RFID readers. Do you know if this will work with the esp?
https://thepihut.com/products/rfid-breakout-board#product-reviews
TIA!
-
Hey there, not sure if this is an issue with seader or I'm trying to read an unsupported card type. I've followed the Smart Card 2 Click guide and am attempting to read an HID iClass card that says "H…
-
### Description of the feature you're suggesting.
Hi,
i have one of these badge in 125khz, but my flipper can't read it : https://www.deister.com/uploads/tx_ttproducts/datasheet/tpx-keyfobs_datashee…
-
Hi,
I'd like to start by thanking you for this library, I'm using it regularly :-)
However I noticed some unexpectedly high blocking times when updating the display: about 20ms to update all 4 dig…
-
Fresh wdsp and linhpsdr source from Github.
Required libraries all from repository of Ubuntu 20.04
Compile and link for wdsp library is correct
Compile of linhpsdr work without errors.
Running lin…
-
Hi
I have tried T-Echo with SoftRF firmware, and also tried Legacy, OGNTP, FANET protocols and also tried different frequencies like EU, IN etc., the devices do not show up on "received aircrafts".…