-
Link time optimization is increasingly common across linux distros, but this fails to build on gentoo when lto is enabled.
I would expect this is easy to replicate with `CFLAGS=-flto -Werror=odr -W…
-
An ExtIO_rasdr2.dll is to be developed to enable RASDR2 hardware to be used in a wide variety of existing Windows-based SDR software.
This software will allow beta-testers to evaluate RASDR2 hardware …
-
Hi.
This is the best signal I can get in the Philippines. I see clear 16QAM (layer B) + QPSK (layer A). Feel free to share it with people / on your website / on GitHub, etc.
http://ckhis.ck.tp.e…
-
I propose that the label names be changed so as to match tag names found in gnuradio, so that someday some compatible behavior or even standard may evolve.
The following tag names are used in gr-uhd …
xloem updated
8 years ago
-
Greetings ptrkrysik!
I'm trying to install gr-gsm on a Kali Linux build (2019.1.2) using the guide located here:
(https://harrisonsand.com/imsi-catcher/)
I was able to successfully execute ever…
-
### What type of issue is this?
permanent - occurring repeatedly
### What issue are you facing?
Facing the following error using gqrx and gnuradio companion with a CCC rad1o SDR (rev5 hackrf firmwa…
-
Currently, the RX Multiplexer is placed before the IQ correction module in the FPGA design. This has two drawbacks:
- A custom FPGA application working on the IQ samples would probably want to use th…
-
grgsm_scanner does not pick up any base stations. Below is the output when run with the debug flag. This is being run on an ubuntu docker container. The rtsdr device is found when running rtl_test. Ca…
-
Hi,
I'm still learning to use BladeRF xA9 with GNU Radio Companion and wanted to modulate a signal and send it through a RF Cable and receive it on the receiver side and demodulate to retrieve the or…
-
Hello
i can proficiently use gnss-sdr with nuand bladerf x40 in real time operation only with L1 band.
I like to make the receiver work in multiband mode (L1/L2 or L1/L2/L5) and i tried several .c…