-
**Describe the bug**
ECU on table, i send gnd to CKP pin and triggerprimaryfall jumps from 0 to 155 and throws a warning attachedin screenshot 1. Using custom toothed wheel or 60-2 (and probably many…
-
This board is full of features for a very light design (4.2g), as an integrated serial elrs 2.4 rx, 2 serial ports, 12A esc, baro and efficient MCU, it would be interresting to integrate it to Inav pr…
-
### Description
MCU: NRF52840
Operating system: zephyr-v3.4.0-77-g75293c8c79eb
I have a simple "hello world" application, with some driver initialization for a custom board.
Program .hex fil…
-
The lib includes a wait on SCL high, this is either an event or a polling loop, dependent on implementation.
If this is called on a system where the pull up isn't present then the project can hang…
xross updated
1 month ago
-
**Application version**
4.20.24-mb
**Platform**
Windows 10 x64
**Printer**
custom
**Reproduction steps**
load my project file and look at the sliced output in the preview
**Screenshot(…
-
## Bug Report
I don't know if this is a bug or I just don't have the upload stuff set up correctly
### Current behavior
```text
arduino-cli upload -p /dev/ttyACM0 --fqbn STM32:stm32:Nucleo_64…
-
### The problem
Running ESPHome 2024.9.2 in a docker. 9 devices connected. The ones based on ESP8266 stay online/mDNS keeps on working, the ESP32 all drop off after some amount of time. When I reboot…
-
Hello
I don't know if the last version of Esphome break all my conf of this Athom Relay 4CH but this relay seems boot and after each action on switch it reboot, disappear from Home Assistant, .....…
-
When selecting **TYPE OF EXPORT: Multiple Boards**, Trello custom fields only download data for the current board, the custom fields for the other boards keep empty.
In the following example, we do…
-
Wokwi is a simulator. The idea is that we could be able to simulate a v7 board, including it's main two chips:
- PCA9535 , I2C 16 bit IO expander, manages eink slow signals
- TPS65185, also talks …