-
## Introduction
Zephyr at present does not have a provision to control stepper motors. **Stepper Motor Controllers** do have a set of common functions which can be bundled together in a API as pres…
-
I'm trying to get 2.2 Boards to work with an UART controller.
Until now I managed to get the Fork of Herleybob to spin the wheels but since that firmware doesn't really seem to be supported I conside…
-
Hello.
Following directions in other issues, I removed core 2.7.1 and installed your 0.0.3 .
The code I'm compiling is:
```
#include
#include
// Using GPIO2 as CS
Wiznet5500lwIP eth(2)…
NdK73 updated
4 years ago
-
Hello!
Reading the MFRC522 data sheet, it seems like it supports several power-saving modes, including a "soft power-down" mode (http://www.nxp.com/documents/data_sheet/MFRC522.pdf). Is there a way…
-
hi , i have ESP32 esp-wroom32 with yellow pins:
https://www.aliexpress.com/item/32845423155.html?spm=a2g0s.9042311.0.0.27424c4dYMzqRH
i upload succesfull the bin file of last release for ESP32
bu…
-
Hello. I'm experiencing an issue while merging 4 HTTP inputs and outputting to a Dektec modulator. Everything works for some 6+ hours but then I notice the picture is stopping and then bursting every …
-
First, this project is awesome! Thank you. Second, it looks like you are using the optoisolator as a level shifter, but maybe not only, given there are multiple writers to green on the bus. Shouldn't …
-
I really love your solution and I am going to build 4 of them.
Buying from Aliexpress they only costs me US$ 35,- per controller :-)
But... how about brakes?
Dumpload is an expensive solution, an…
-
Hi!
I'm thinking that we can help the the project to survive and help us to maintain the integration with home assistant alive.
We are a lot of users, and we can massively write to Haier Europe.
…
-
I created this thread as a means to collect feedback about your experiences using this solution. Installation pictures and screenshots are highly welcome.