-
### The problem
DAC function is not available for ESP32S2 modules. Internal DAC pins for ESP32S2 are GPIO17 and GPIO18 but esphome allows pins GPIO25 and GPIO26.
Am I doing something wrong, is t…
-
For some reason the versions 3.3 and 3.6 are not working on my ESP32-S2 I bought from China. I load the files into the board and when I connect into PS4 the browser stays on the load phase of the inde…
-
Hello, i'm working on an ESP32 S2 (WROOM) for a project under MicroPython, the firmware I use is the following: **GENERIC_S2-20220117-v1.18.bin**
The problem being that the filesystem has completely …
-
Hi,
I´ve ordered the ESP32 S2 because its a newer version. I tried to flash Karadio32 and found out, that the bootloader needed is different from the ESP32 Bootloader.
What must be changed to us…
JocB1 updated
2 years ago
-
Hello
I would like to use an ethernet on the Espressif ESP32-S3 with the WIZnet ethernet chip, like as you did with RPICO. Is possible to use this driver to works in the same way with ESP32 family …
-
I am using JPEGDEC with ESP32-S2 and platformIO. I use JPEGDEC by adding it to the lib_deps: in the platformio.ini file
lib_deps =
moononournation/GFX Library for Arduino@^1.4.6
bitbank2/JPEGDE…
-
I tried to update my ESP32-S2 with the newst xhost-pro release (0.9.7 ?) today 2022-09-13 via web installer. After few seconds after I push the INSTALL button, I get the message that installation fail…
-
how should I proceed to use it in Arduino IDE ( https://www.arduino.cc/en/software/ )
There is currently support for:
- Esp32S2 Dev Module
- ESP32S2 Native USB
- TTGO Lora32 OLED
- TTGO T1
- T…
-
Hello I get this error:
In file included from C:\Users\Markus\Documents\Arduino\libraries\ESP32-I2S-Simple-Async-Audio\src/ESP32I2SAudio.h:2,
from C:\Users\Markus\Documents\Arduin…
-
LeafMiner v 0.0.13
I would like to have an option to disable firmware autoupdate. Default option of checkbox could be **enable**
It looks like firmware can do autoupdate:
```
$ miniterm /de…