search

xperiments / xhost-pro

30 stars 12 forks source link

Installation of via Web Installer not possible for ESP32-S2 #10

Open franden opened 1 year ago

franden commented 1 year ago

I tried to update my ESP32-S2 with the newst xhost-pro release (0.9.7 ?) today 2022-09-13 via web installer. After few seconds after I push the INSTALL button, I get the message that installation failed.

2022-09-13_XHOST-PRO-issue

If I ty to push BOOT button before I click on INSTALL button I get the same issue.

Steps to reproduce:

  1. connect ESP32-S2
  2. push and hold both buttons (RESET and BOOT) for few seconds
  3. open web installer and click connect
  4. select ESP32-S2 device
  5. select install XHOST
  6. push install button

Expected behaviour: ESP32-S2 must be erased, XHOST-PRO must be installed

Additonal infromation: Last time I installed the XHOST-PRO in spring 2022 (Release 0.9.5) via web installer without any issues.

please fix the issue

Euphoriarules commented 1 year ago

Got same problem (Windows 11 and usb3 notebook) im try on other computer (also Windows 11) with usb2 port and is working for me.

thefunkygibbon commented 1 year ago

yeah it didnt work for me either. I ended up flashing the firmware file (the main big one) via https://web.esphome.io/?dashboard_wizard worked fine.

damo503 commented 1 year ago

I have a ESP32-S2 Mini V1.0 and I tested it and it's not working. The problem seems in the firmwares 0.96 and 0.97 and not in the filesystem because the 0.95 firmware with the last filesystem works fine with the esp32-s2 V1.

You can do it flashing the firmware 0.95 with a flash-tool or with the url https://web.esphome.io/?dashboard_wizard , and donwload the last esp32-s2-base.fs.ota to have the last goldhen

to flash the filesystem Ota file just connect your pc with the xhost-pro 0.95 by wifi (like in your ps4) and go to 6.6.6.6 url and you have to use the upgrade filesystem option it's just in Xhost-->Settings-->Xhost-Pro Setup -->firmware -->Flash new filesystem, select your ota file, when it's done, reset your Esp32 and enjoy it.

welsontec commented 1 year ago

I tested two esp8266 that I have, both tested with ide arduino, cable and usb works perfect. When I install via the web it doesn't work and 1 of these installs with "NodeMCU-PyFlasher-with-ResetLocale" and "esp8266.bin". What you installed connected and configured on ps4 only appears error screen "Failed to trigger explode..." I already modified usb speed, but I don't know what else to do. Any tips? Thanks