This is a WIP document. More detailed documentation will come in the future
A multi service HOST for PS4 jailbreak
RECOMENDED WAY!!!!. WebUSB. Use the Web Installer
Flash the correct binary from [releases] to your board (requires python & esptool.py installed)
#esp32-s2
esptool.py --chip esp32s2 --port PORT write_flash 0x00000 YOUR_BOARD.bin
#esp8266
esptool.py --port PORT write_flash 0x00000 YOUR_BOARD.bin
Depending on you OS you may use other tools like the Espressif download tool or pyflasher
Connect to AP
[SSID] xhost-pro
[PASS] 12345678
Navigate to
http://6.6.6.6/xhost/setup
Configure USB Delay
Settings-> XHOST-PRO Setup-> System-> USB mount delay
Configure WiFi if needed
Settings->XHOST-PRO Setup->Network Setup
You are done! Navigate to main host page
http://6.6.6.6
user: xhost-pro
pass: 12345678
There are 5 ways to update your board.
(.bin)
(.fw.ota)
(.fs.ota)
(.fw.ota)
(.fs.ota)
Needed files will be found in the releases
folder.
Main xhost-pro server setup page
http://6.6.6.6/xhost/setup
This are the avaliable server API end points
/xhost/wifi/connect
Manages Network Mode (POST)/xhost/wifi/ssid
Gets SSID info (GET)/xhost/version
Gets xhost-pro version number (GET)/xhost/usb/on
Enables USB (GET)/xhost/usb/off
Disables USB (GET)/xhost/update
Manages ota updates (POST)