-
seesaw_crickit_test.py fails with a ValueError Invalid touch pin
This is not surprising as the code tries to use ss.touch_read with crickit "pins" range(4) - 0 to 3 (no pin mapping).
In the Cricki…
-
Many experimenters are using the LMIC for prototyping with new hardware.
It would make sense to add a diagnostic sketch that tests the hardware interface in a simple way, and reports errors in a mo…
-
When using DMX Output and Pau Stoffregen's [encoder library](https://github.com/PaulStoffregen/Encoder) with interrupts, fast movement of the encoder causes the Arduino to fully lock-up.
The same b…
-
Nous n'avons toujours pas compris pourquoi le code ne se compilait pas, cependant, les conditions posant problèmes servant seulement à définir quel type de carte nous utilisons, et donc quel port défi…
-
I have been trying to implement this SAMD21 port of FreeRTOS in conjunction with sleep modes on and Adafruit Feather M0.
It does not really work, which is why this post, I have broken my sketch down …
-
Since the addition of ZeroDMA library into the Core we have a conflict with the I2S library's DMA:
`/var/folders/y6/w7n3cq754jv3vkt3vl8tvkkc0000gn/T/arduino_build_504202/libraries/Adafruit_ZeroDMA/…
-
Got the Adafruit thermal printer. The example supplied works perfectly except for the 2 `printBitmap` parts.
In both cases (the adafruit logo and the QRCode) starts ok (as in the first top section …
-
administrator@raspberrypi:~ $ python3 rgb_display_ili9341test.py
Traceback (most recent call last):
File "/home/administrator/rgb_display_ili9341test.py", line 25, in
spi = busio.SPI(clock=b…
-
Using a Rockblock 9603 with a ItsyBitsy M4 powered by 5V supply. it all appears to be working but I constantly get 'Protocol Error'
Debug diagnostics of the transmission below:
>> AT+SBDWT
Waitin…
-
**Describe the bug**
When manually setting the RTC time through the serial monitor, the time doesn't get set for the clock until after the sample period which may cause issues if the user doesn't wai…