-
I have a ArduCam 518, I set the camera to the correct rotation 180° so its right side up, the camera is installed upside down FYI.
I cannot find a way to get the timelapse to be upright all the vid…
-
**Is your feature request related to a problem? Please describe.**
I have several printers. Every time I open mainsail, it always lands on the first printer in the list (and the list can't be ordered…
-
Since Debian Buster (Debian 10) has reached End of Life and End of Support, it should no longer be used. As new updated versions of Klipper interfaces Mainsail and Fluidd are phasing out support for B…
-
In the guides, you state:
"Before starting, verify whether your chip is STM or GD. You can do this by either opening your electric box and checking manually, or by navigating to 'Machine -> System …
-
Not exactly an issue per se. I have a sv06 plus and a BTT pad 7 that I have Klipperized using Bassamanitors GitHub [https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus](url).
It wor…
-
Show the last printjobs when a filter is selected and allow to reprint the printjob
-
I am running Raspberry Pi OS Debian Bullseye, Klipper, KlipperScreen, Mainsail, and Moonraker.
The CAN bus does not connect to my Octopus or Hermit Crab Can edition. This is not an issue when using…
-
Hi!
I'm having this problem a while now. After some 'fault' event on HH (filament Runout, gate empty, etc..), my systems starts an MCU shutdown in all MCU's, usually starting by EBBCan (toolhead MCU)…
-
### What happened?
In the calibration menu, in the retreat calibration function, the step input does not work. No matter which step size is entered manually, the G-code always contains steps in 0.1 m…
-
### Is your feature request related to a problem? Please describe
the Creality K1 (Max) uses a in-ram tempfs /tmp folder with only 100MB (max 200MB is reachable due to memory limit). And when upload …