-
**Describe the bug**
During mid-flight and sometimes after battrery swap without turning transmitter off, my OSD's RSSI value drops to 0 and starts flashing. A transmitter reboot is required to regai…
-
Hi, I'm reconstructing my Quad after a year or so. I noticed that for good reasons they dropped support for the GPS on Cleanflight. So I decided to try INav insted. When configuring my ports, I have I…
-
**Describe the bug**
Hello! That's my first post on Github, so hello everyone, You are doing amazing job :) I don't know anything about programming, but i hope that by letting you know about that bug…
-
### Board and Version
Matek F405-STD BetaFlight STM32F405 Flight Controller
https://www.banggood.com/Matek-F405-OSD-BetaFlight-STM32F405-Flight-Controller-Built-in-OSD-Inverter-for-RC-Multirotor-FP…
-
After arming, the motors continue to idle regardless of stick input.
Flashed build 1341 to FC. Set dshot_birdir=on, left rpm_filter settings as default. Set gyro update and PID loop to 4k/4k. …
-
So far I notice:
1. CRSF
2. SBUS
3. WFLY
-
A receiver can send still valid sbus frames with e.g. failsafe positions, but also sends the failsafe or rc lost bits So we do get valid frames only, the RC lost is never set in that case since we do …
-
I believe I was updating from Agent 1.2.6 to the latest. Agent loaded fine but when I went to upgrade the firmware it failed and the keyboard led went blank. Sadly I do not have a capture of the outpu…
-
Hello,
This is not how I like to write issues but I have no real indication on how to reproduce the issue.
I was using v0.3 absolutely fine until next week, on betaflight 3.2.2. The other day, I…
-
Port from betaflight.