-
CircuitPython 7.2.5: tested on FeatherS2 and Adafruit Feather ESP32-S2. Also true as far back as 6.3.0 (did not test further back).
Using the PCA9685 driver, there is at minimum an almost 10ms gap …
-
### The issue
Hello! I'm trying to flash the scd30 example program to an esp32s3 board.
https://github.com/UncleRus/esp-idf-lib/tree/master/examples/scd30/default
I'm able to compile the exampl…
-
My device hardware B1.9. I installed ATC_V34d. The image is as seen in the picture. Temperature and humidity information shows as no value on the phone.
 2020 ladyada for Adafruit Industries
#
# SPDX-License-Identifier: MIT
i…
-
Hi @smuellerDD, Please forgive maybe the mistake of opening an issue here.
I am stuck on GRUB boot after I enable LRNG on OpenWrt x86_64 Linux 6.1.47.
LRNG Version: v50
Patch Files: https://git…
-
### Describe the problem/bug
mcp342x (analog input) input does not populate values
mycodo.log contains the following:
ERROR - mycodo.inputs.mcp342x_ab51a19d - InputModule raised an exception wh…
-
Hi, I'm kinda new here (no git and to ESP-IDF framework).
I was trying to figure out how littleFS works in the esp32 via the IDF framework, but I ran into multiple errors while trying to build the …
-
**Note on Bugs**
I am running bmc image (details below) and trying to access the sd card attached to the board. However when i type in fdisk -l , it shows nothing. If i look into the dmesg, i see not…
-
I just flashed a couple devices: LYWSD03MMC B1.4, Software Version: 3.7, Sensor: SHTC3
3.7d is the firmware.
These devices disconnect fairly quickly after reconnecting. If I am quick enough I ca…
-
## Bug Report
### Current behavior
```
arduino-cli lib install --git-url https://github.com/FStefanni/arduino-sht.git
```
The command fails with the following log:
```
Error initializing in…