-
**Describe the bug**
Attempting to probe-run and flash a STM32WL55JC1 returns a variety of errors with the probe connection.
**To Reproduce**
```console
$ probe-run --chip STM32WL55JCIx --verbo…
-
### Description of defect
Were trying to reduce sleep current like the SX126X driver by using the following
"stm32wl-lora-driver.sleep-mode": 1
However it doesn't even compile, fixing t…
-
This is a similar issue reported by https://github.com/stlink-org/stlink/issues/1241 but for a different target.
- Programmer/board type: Onboard STlink (NUCLEO-WL55JC)
- Operating system an versi…
-
Hello,
I am hoping someone can help me. I am trying to build RadioLib (v4.0.4) for the `Heltec CubeCell Board AB01` Arduino compatible board. The board is an ASR650x SoC with an SX1262 (https://hel…
-
Hello,
is there any chance I can get some support setting up a dual core project on the WL55JC1 chip?
greetings,
Moritz
-
**Describe the bug**
The subghzspi driver fails during initialization when setting up pinctrl.
It fails because subghzspi doesn't have any pinctrl states so `pinctrl_apply_state(..., PINCTRL_STATE…
-
Hello,
I was generating a .repl from a .dts for the **sensortile_box** platform and the **hello_world** zephyr example.
Initially I tried using the following command
```
dts2repl --overlays armv…
-
**Describe the bug**
The STM32WL on the LoRa E5 Dev Board fails to read from the ADC with the example code in PlatformIO.
Please also mention any information which could help others to understand
…
-
Not everyone will want this, it's configurable in the IOC (and a production app will configure it elsewhere), but I will change to use the internal (static) EUI. Only problem is fetching it from the M…
-
Describe the bug
Attempting to probe-run and flash a STM32WL55JC1 returns a variety of errors with the probe connection.
To Reproduce
$ probe-run --chip STM32WL55JCIx --verbose
$ # or
$ cargo…