-
I use oplinkmini with a bluetooth module to allow my surface tablet to communicate with sparky 2 over 433mhz set at 25mw using bind wizard. After connecting the tablet and arming the front of the quad…
-
The UTXBRD setting should be replaced with a set of bool parameters:
- Emulate RSSI
- Use MAG
- Use BARO
It's because of TauLabs UAVTalk version.
-
TauLabs/TauLabs#1594 details a simple reproducible RawHID segfault. The stack trace shows that RawHID::close is being call but there was never a call to RawHID::open so the read and write threads are …
-
Wiki page needed with postmortem of Endomorphism release.
Lead-up to Endomorphism is here: https://github.com/TauLabs/TauLabs/wiki/Endomorphism-(September)-release.
Discussion in #1862 is a start.
mlyle updated
8 years ago
-
BrainFPV TL Bug: https://github.com/BrainFPV/TauLabs/issues/33
When the user uses PID values that are outside of the range supported by the OSD menu, the menu limits it to the range supported by the …
-
Could be a consequence of https://github.com/TauLabs/TauLabs/pull/1985, but I have seen a problem several times now where the firmware links against the wrong library. Not sure how repeatable this is,…
-
It should have some basic coverage here:
https://github.com/TauLabs/TauLabs/wiki/Flightmode-Settings
-
I was setting up my naze for autotune again real quick and managed to leave MSP configured up on the main port with the module disabled. Now I get to boot pin and reflash.
Desirable alternatives:
1.…
-
I can reproduce by:
- having no boards connected to PC,
- running GCS,
- switch to Flight Data tab,
- switch to Welcome tab,
- close GCS
```
0 QWindow::parent() const 0x7ffff691e860
1 Q…
-
Opening this issue so it doesn't get forgotten. There have been several attempts to add fast heap support, but it keeps crashing on some targets.
Original PR: TauLabs/TauLabs#1691
Take 2 PR: TauLabs/…