-
## The problem
Since updating the MQTT broker in Supervisor, I've noticed connection issues with multiple applications talking to MQTT, especially the PAI add-on (Paradox Alarm Interface), but …
-
How should I configure an `inverter.conf` if I need to use this container for two inverters?
Each unit connected to a separate port of Raspberry Pi. Using USB port (/dev/hidraw0)
Now my config is:
…
-
I have managed to send data form inverter to influx db. But with grafana i am tottal noob and when inporting grafana dashboard it does not show any data.
What i possibly do wrong ?
-
Hi,
i try to use commands QEY, QEM, QED, QLY, QLM, QLD the inverter return NAK.
QET and QLT works.
Do you check and help me?
-
Hi there,
Apologies in advance if this has been covered already...
I was just wondering if it would be possible to make this project available for installation as a custom repository in HACS pe…
-
Struggling with finding the QPIRI and QPIWS values for my VOLTRONIC AXPERT INVERTER 3KW (2021).
I've tried multiple configs found in the other issues logged on the project.
Is there some list of pos…
-
I have ups dexp mix 850va.
Here is my config:
```
[ups1]
desc="dexp"
port = auto
driver = blazer_usb
default.battery.voltage.high = 2.27
default.battery.…
-
I have a "Crown CMU-SP1200IEC LCD USB" UPS which interface is similar to [Hunnox HNX-850 mentioning here](https://github.com/networkupstools/nut/pull/638) and works with the 'hunnox' protocol in Linux…
-
I have Voltronic Axpert III 3kw inverter and installed on hassio hassio-axpert application. When it start that has an error. IT can't receive any data from inverter, Mqtt queue is empty.
Is it supp…
-
Good Day,
Firstly, thank you so much to all who contributed to this repo.
As per the description, It is the Kodak 7.2 OG Branded Model
Data being logged from the MQTT "voltronic_Load_watthout…