-
karabiner seem to not detect my dualshok 4 controller wich can easily connect to my mac, but when i search for it in target devices i cant find it
-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.1 on 2024-07-23; ProS3 with ESP32S3
```
### Code/REPL
```python
import alarm
import board
import time
from microcontroller import …
-
I'm using bfgminer on my October Jupiter for more than a month.
I tried to switch to bfgminer on my November Jupiter but I got very low hashrate (~14GH instead of ~640GH).
I guess the root cause is …
-
Bonjour Valentin, bonjour à tous,
J'ai essayé de faire fonctionner tout ça, j'ai acheté le cable (croisé, RS232 des 2 cotés) le wemos d1 (j'ai prit un az delivery ESP 8266) et le convertisseur TTL.…
-
1. [NEC 625 (Page 23)](https://www.nrel.gov/docs/fy21osti/78085.pdf) specifies no back-feeding when grid loses power
2. Do We Want to Use 220V or 48V or 24V?:
a) Use 208V from school outlet t…
-
I recently encountered problems with ELN, my server reports a TPS of 3/20 and is now almost unplayable, my map is approx. 7500x3000 blocks it's quite big in a Flans mods car it will take you 5-10 min …
-
Route Planning: EV-Friendly Scenic Cruising in North Central Washington
Exploring the growing Plug-In NCW network
The Big Picture
In 2005, the Port of Chelan County in Washington state gathered a…
-
Buy different ones, and try to abuse them. See which ones handle apocalypse the best.
-
I know it sounds strange, but that is exactly what happens if I apply some frequency that gives "sync out of range" on monitor.
Device disconnects form local network, I need to reset it few times …
-
I'm creating this as a reference for GCodes we need to implement so we can use the Prusa Slic3r with no modifications.
- M201 (needs investigation - what we have is triggering errors when Slic3r trie…