-
Running pv_opt on a HA Green.
Set up eventually!
Solis inverter, Pyton tech batteries.
Using Solax modbus where I have 169 entities.
However, I have a dashboard error and my dashboard never…
-
Creating this issue for **discussion about this extension** and **testing newer version** before uploading on gnome extension website.
So that tester, can share your result and your opinion here.
…
-
Some options we should let some drivers test out:
* Break mode vs. coast mode
* Directly controlling power vs. controlling velocity
* Squared inputs vs. not squared
* Maybe Arcade vs. Tank control…
-
Hi There,
It's not working on Redmi K30 Pro/POCO F2 Pro.
The control file location is "/sys/class/power_supply/battery/battery_charging_enabled", could you please add the support?
Regards
-
**Is your feature request related to a problem? Please describe.**
I have two cars and one home charger. Each night I typically plug in the one with the lowest charge. I want to be able to use the f…
mvso updated
3 months ago
-
It is possible to change am the AC charge current to 100%, 90% and 60% when sitting in the car using the settings in EV screen on an Ioniq 5 and others with the same platform.
This option would've …
-
Hi @matth-x ,
I want to send meter values at every 30 min when there is no active transaction and during transaction, want to send meter values every 1 minute.
I checked that we can do it with clo…
-
Thanks for writing a wonderful app! Here is the control file location for the Nord N200 5G: `/sys/devices/virtual/oplus_chg/battery/mmi_charging_enable`
0 disables, 1 enables
-
Right now, the charging algorithm is very dangerous. It's ok to connect the output to a BMS, but not to plug directly on a battery (whatever the chemistry).
It should follow charging curves and als…
-
I'm not sure if there is a better place to discuss this than the issues section? Under normal conditions, it seems the battery (smile B3) registers a discharge of around 36W when it's neither charging…