-
## Bug report
COM-port does not come up after flashing. Windows receives no device description.
Version v4.4.4 (copter) is working fine!
I do not want to try the ardupilot bootloader for the…
-
Hi there,
firstly, thank you for this great library! I've stumbled upon it when researching DFU libraries for a Flutter package I was planing on developing.
I did some quick tests, flashing both…
-
When downloading Daggerfall Unity on macOS 15.1, you may not be able to open the game due to Apple security requirements for downloaded files.
In terminal, you can do:
`xattr -d com.apple.quaran…
-
The SKIPR board uses for klipper configuration normaly Bootloader offset (48KiB bootloader (MKS Robin Nano V3)). So in my mind I should in CanBoot configure the Application start offset to 48KiB - or …
-
I'm trying my hardest and searching I promise.
I'm trying to flash via usb in dfu mode. I configured per the v1.2 manual. Device shows as STMicroelectronics STM Device in DFU Mode. I am not using ca…
-
I've followed the instructions here:
https://github.com/mohitbhoite/hadbadge2019_fpgasoc/blob/master/doc/soc-dev.md
On reboot, it appeared nominally the same, so I'm not sure how to tell if I was su…
-
some issues happen in data transmission .
1 . i have to transmit or receiving the data . so how to do this?
2. i have to change in DFU_Transfer file ?
3. void HSUSBD_ProcessSetupPacket(void)
{
…
-
Patch:
[0001-stm32-Fix-DFU-serial-number-generation.patch.gz](https://github.com/libopencm3/libopencm3/files/847111/0001-stm32-Fix-DFU-serial-number-generation.patch.gz)
Tested on STM32F2, STM32F3…
-
Consider allow adding another polling object in the loop so that multiple transports can be supported simultaneously. For instance, as per https://www.st.com/resource/en/application_note/cd00264342-us…
-
To permit deallocation of a subgraph of a running job's resources `dfu_impl_t` will need to be overloaded:
https://github.com/flux-framework/flux-sched/blob/af4447ffd27400cc33a908c62201380a98075571/r…