-
**It would be great to have tasmota'ed gadgets with RJ45-Ethernet-plugs.**
Inherited from
https://github.com/arendst/Sonoff-Tasmota/issues/4936
Wireless is not always the best Solution for sens…
-
I am using captcp to extract tcp throughput for point to point protocol links (PPP) from pcap files. Now using same captcp, I am not able to extract WiFi 802.11ac pcap files which are of the type IEEE…
-
Does this issue occur when all extensions are disabled?: Yes
- VS Code Version:
- OS Version:
Version: 1.95.3 (Universal)
Commit: f1a4fb101478ce6ec82fe9627c43efbf9e98c813
Date: 2024-11-13T…
-
The eISCP protocol can be used over serial(RS-232) and over ethernet.
Since This already wraps the ISCP commands in the eISCP frame format, it should be easy to modify this project to support the ser…
cl0rm updated
6 months ago
-
Hi (@alexforencich ),
I am trying to implement Example Design Code for Digilent Atlys (Xilinx Spartan 6 XC6SLX45) on SP605 Evaluation Kit (Xilinx Spartan 6 XC6SLX45t).
Atlys board has an Active Lo…
-
Hello,
I just tried out connect Node Red to Fanuc robot controller, but there are needed more informations to configure protocol. This is list of these parameters:
- Vendor ID
- Device Type
- Pro…
-
```
What steps will reproduce the problem?
1. Create a new stream
2. Protocol Selection - Ethernet II - IPv4
3. Protocol Data - TOS/DSCP
What is the expected output? What do you see instead?
It woul…
-
Hello, I'm an embedded developer for a company that made an industrial protocol bridges based on ESP32. We used you ProDinos but we're experiencing issues with SPI. With base Ethernet library (cannot …
-
### Description of Issue/Question
One of my customers reported Jsnapy issue being the test reported 2x failures but there are no faults actually captured in the results.
Example output:
*****…
-
### What happened?
After saving, only ports 1-3 applied properly. Ports 4-8 (in my instance) changed from the following settings:
mA/LED: 55mA (default setting)
Data GPIO:
changed to:
mA/LED: …